| 大型护坡模具安装、拆卸非常占用时间 |
| 添加时间：2019/9/30 16:29:39 浏览次数： |
| 大型护坡模具安装、拆卸如采用人工压压板等传统方式是非常占用时间的,通常需要一个班次.而国外,无论是压铸机还是压铸模具,都非常重视这个问题,包括模具的定位、模具的夹紧、顶出复位杆安装、行程开关连接、抽芯油缸油管连接、冷却水管连接等等,都做到快速连接,并且如果模具需要几个油缸或行程开关的接头在模具上串、并联好,做的非常人性化.而在型芯更换等其它细小环节上都下足了功夫,充分考虑了模具的使用性、模具的生产效率。 It takes a lot of time to install and disassemble large slope protection moulds, such as manual pressure plate, which usually requires a shift. However, foreign countries, whether die-casting machine or die-casting mould, attach great importance to this problem, including the positioning of the mould, clamping of the mould, installation of ejection reset rod, connection of stroke switch, connection of oil pipe of core-pumping cylinder, connection of cooling water pipe, etc. Fast connection, and if the die needs several cylinders or stroke switches connected in series and parallel on the die, it is very humane. In the core replacement and other small links, efforts have been made to fully consider the usability of the die and the production efficiency of the die. |
| 上一页 植草护坡模具生产工艺 |
| 下一页 防撞型路牙石模具介绍 |