15188633222联系我们
名称：保定巨盛模具制造有限公司-马路牙子模具,路牙石模具
电话：13833064090
联系人：高经理
地址：保定市清苑区阎庄乡中阎庄工业区
新闻动态
全自动倒角是利用的专门的倒角机来进行的
全自动倒角是利用的专门的倒角机来进行的，设置好参数之后就可以自动工作了，不过这种机器使用的厂家并不是很多，一来是比较的占地方，二来是使用率不高。
Full automatic chamfering machine is used for chamfering. After setting the parameters, it can work automatically. However, there are not many manufacturers using this kind of machine. On the one hand, it takes up a lot of space; on the other hand, the utilization rate is not high.
现在大部分的石材厂并不是只做路沿石的，通常既做各种的火烧板、光板、荔枝面等板材，又做各种路沿石的。因此大部分石材厂还是采用半自动和人工倒角的方式居多。
At present, most stone factories do not only make curbstones, but also various kinds of curbstones. Therefore, most stone factories still use semi-automatic and manual chamfering.
所谓的半自动指的就是利用红外线切割机来进行倒角，在加工路沿石的时候先把毛石切割成所需要的厚度，然后用切机切割成所需规格，最后调整锯片的倾斜度就可以倒角了，当然这种方式只适合倒斜角而不能倒圆角。
The so-called semi-automatic refers to the use of infrared cutting machine chamfering, in the processing of the stone along the first time to cut the thickness of the rubble, and then cut the machine to meet the required specifications, and finally adjust the tilt of the saw blade can be chamfered, of course, this way is only suitable for chamfering and not fillet.
Full automatic chamfering machine is used for chamfering. After setting the parameters, it can work automatically. However, there are not many manufacturers using this kind of machine. On the one hand, it takes up a lot of space; on the other hand, the utilization rate is not high.
现在大部分的石材厂并不是只做路沿石的，通常既做各种的火烧板、光板、荔枝面等板材，又做各种路沿石的。因此大部分石材厂还是采用半自动和人工倒角的方式居多。
At present, most stone factories do not only make curbstones, but also various kinds of curbstones. Therefore, most stone factories still use semi-automatic and manual chamfering.
所谓的半自动指的就是利用红外线切割机来进行倒角，在加工路沿石的时候先把毛石切割成所需要的厚度，然后用切机切割成所需规格，最后调整锯片的倾斜度就可以倒角了，当然这种方式只适合倒斜角而不能倒圆角。
The so-called semi-automatic refers to the use of infrared cutting machine chamfering, in the processing of the stone along the first time to cut the thickness of the rubble, and then cut the machine to meet the required specifications, and finally adjust the tilt of the saw blade can be chamfered, of course, this way is only suitable for chamfering and not fillet.
